Home   About Us   Delivery   Our Terms   FAQ'S   Contact Us   Site Map      
Items: Value: View Cart | Checkout 
 

POE-151 POE 802.3af 10/100Mbps Injector
POE-151 POE 802.3af 10/100Mbps Injector
Ref: POE-151



<< PREVIOUS PAGE  CHECKOUT NOW >>    
CLICK TO SEE DATA SHEET



The POE-151 is an IEEE 802.3af Power over Ethernet Injector that provides DC 48V over Ethernet cables. The POE-151 IEEE 802.3af Power over Ethernet Injector inserts DC Voltage into Cat.5 cable, allowing the cable between the Injector (POE-151) and Splitter (POE-151S-5V/9V/12V) to transfer data and power simultaneously. The maximum distance between the Injector (POE-151) and Splitter (POE-151S-5V/9V/12V) is 100 meters. With POE-151 being installed, it combines the Ethernet digital data with power over the twisted pair cables as an IEEE 802.3af Power over Ethernet Injector. And the IEEE 802.3af Power over Ethernet splitter shall separate the digital data and the power into two outputs.
Connect to IEEE 802.3af devices:
Due to the capability of IEEE 802.3af standard, the POE-151 can directly connect with any IEEE 802.3af end-nodes like wireless access point, IP phones and Internet camera where support IEEE 802.3af In-line Power over Ethernet port.

The IEEE 802.3af Injector and Splitter installation:
For a place hard to find the power inlet, POE-151 and POE-151S-5V/9V/12V, as a pair, should provide the easiest way to power your Ethernet devices such as PLANET ICA-110, Internet Camera on the ceiling, or WAP-4000, Wireless Access Point that is installed on the top of the building. It’s the same with the VIP-153PT, IP phone used in office or home.

• Complies with IEEE 802.3af Power over Ethernet, IEEE 802.3/802.3u 10/100Base-TX
• Provides DC 48V power over RJ-45 Ethernet cable to device with Ethernet port
• LED indicators power input indication
• Distance up to 100 meters
• Auto-detect of POE IEEE 802.3af equipment, protect devices from being damaged by
incorrect installation
• Works with EIA568, category 5,4-pair cables for 10Base-T or 100Base-TX
• EMI standards complies with FCC, CE class B
Model POE-151

Ethernet Connector 2 x RJ-45( 1 for data + DC out, 1 for Data in)
Ethernet Data rate 10/100Mbps( vary on Ethernet device attached)
Input voltage DC 48V, 0.4A
Number of device can be powered 1
Ethernet cable TIA/EIA-568, Category 5/5e cable
LED indicator 1 x power, 1 x POE ready / in-use
Dimension (W x D x H) 73 x 55 x 24 mm
EMI FCC Class B, CE mark
Standard Compliance IEEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet, IEEE 802.3af Power over Ethernet.






Testimonial


Email to a friend