The Best Industrial Grade Data Link and Power Sourcing for Non-PoE Solution
The IPOE-162S is an Industrial High Power PoE Splitter that can split the 48~56V DC over the existing Ethernet cable into the selectable 12V or 24V DC power output. It supports passive 10/100/1000Mbps Ethernet connection ability and complies with IEEE 802.3at High Power over Ethernet standard that supports up to 25 Watts output power to powered device. To fulfill the growing industrial applications, the IPOE-162S is designed to work under the operating temperature range from -40 to 75 Degree C (-40 to 167 Degree F). The IPOE-162S is an ideal solution to transfer power to traditional network device with high power demand directly without the need to install additional power outlets and electrical cabling in the industrial environment.

Innovative Selectable DC Power Output Voltage
Via the innovative 12 volt / 24 volt DIP switch on the front panel, the IPOE-162S can supply either 24V DC power to industrial equipment or 12V DC output to the common network devices, such as wireless Access Point or IP camera. It highly increases the flexibility of the product applications.

Dual Power Output Capability
By supporting up to 25 Watts 802.3at Power over Ethernet cable, the IPOE-162S can satisfy not only single power-hungry equipment but also able to share the 25 Watts output power to two non-PoE Ethernet devices simultaneously through a 4-Pin terminal block. For example, the two power output can be applied as below to completely solve the need of electric source:
- IP Camera (Power 1) + Outdoor housing with fan and heater (Power 2)
- IP Camera (Power 1) + Pan & Tilt Motor (Power 2)
- Analog Camera (Power 1) + IP Video Server (Power 2)

Interface
- 2-Port RJ-45 interfaces
- 1-Port PoE Power+ Data input
- 1-Port Data output
- 2 DC out (4 Pin Terminal Block)

Power over Ethernet Splitter
- Complies with IEEE 802.3at High Power over Ethernet, PD
- Splits the 48~56V DC power over RJ-45 Ethernet cable into DC 12V / 24V output
- Auto-detect of IEEE 802.3at PoE equipment, protecting devices from being damaged by incorrect
installation
- Adjustable two different output voltage options (12V / 2A, 24V / 1A) to fit various devices
- Distance up to 100 meters

Industrial Case / Installation
- IP30 metal case protection
- DIN Rail and Wall Mount Design
- Supports EFT protection 6000 VDC for power line
- Supports 6000 VDC Ethernet ESD protection
- -40 to 75 Degree C operating temperature

Standard Compliance
- IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX
- IEEE 802.3ab 1000Base-T
- IEEE 802.3at High Power over Ethernet standard
- FCC Part 15 Class A, CE

Hareware Specification

Interface
- PoE (Power + Data) Input Port : 1 x RJ-45 10/100/1000Base-T
- Data Out Port: 1 x RJ-45 10/100/1000Base-T
- DC Out Plug Connector: 1 removable 4-Pin terminal block
LED Indicator System
- Power Ready x 1 (Green)
Network Cable
- 10/100/1000Base-T: 4-Pair UTP Cat. 5, 5e, 6
- Distance up to 100m (328ft)
- EIA/TIA- 568 100-ohm STP (100m)
Data Rate
- 10/100/1000Mbps (vary on Ethernet device attached)
DIP Switch
- 12V DC / 24V DC output voltage
Power Input
- 802.3at PoE 48~56V DC
Power Output
- 12V / 24V DC, Max 2A (adjustable)
Dimension (W x D x H)
- 135 x 87.8 x 32 mm
Weight
- 421g
Enclosure
- IP30 Metal Case
Installation
- DIN Rail Kit and Wall Mount Ear
ESD / EFT Protection
- 6KV DC

Power over Ethernet
PoE Standard
- IEEE 802.3at High Power over Ethernet
Number of device can be powered
- 1 or 2 (Vary on Device’s Power Requirement, DC1 + DC2 can not over 25Watts )

Standards Conformance
Standards Compliance
- IEEE 802.3 10Base-T Ethernet
- IEEE 802.3u 100Base-TX Fast Ethernet
- IEEE 802.3ab 1000Base-T Gigabit Ethernet
- IEEE 802.3at High Power over Ethernet
Regulation Compliance
- FCC Part 15 Class A, CE
Stability Testing
- IEC60068-2-32(Free fall)
- IEC60068-2-27(Shock)
- IEC60068-2-6(Vibration)

Environment
Operating Temperature
- (Minus)-40 ~ 75 Degree C
Storage Temperature
- (Minus) -40 ~ 85 Degree C
Humidity
-5 ~ 95% (Non-condensing)

None at present, If you have any comments you feel would be useful to others when trying to install this product please contact us on support@saratota.co.uk or call 0845 500 1447