Full Gigabit Performance for Industrial Network
PLANET IGS-8044MT is a Layer 2 fully Gigabit Managed Industrial switch that equipped with 4 x 10/100/1000Mbps Ethernet ports and 4 x 100/1000Mbps TP/SFP combo interfaces. The 4-Port 100/1000Mbps combo Fiber interface delivers data in high speed transmission, and complies with both Gigabit and Fast Ethernet fiber devices. The IGS-8044MT is also an industrially (substation) hardened managed Ethernet Switch specifically designed with a rugged high-strength protection case, and to operate reliably in electrically harsh, and climatically demanding -40 to 75 Degree C wide temperature environments. The IGS-8044MT is the most reliable choice for highly-managed, and Fiber Ethernet application by offering the powerful features:
- Redundant Ethernet Network
- Manageable
- Power Redundant
- Fully Gigabit throughput capability
- Dual Speed Fiber interfaces support
- -40 to 75 Degree C wide operation temperature
- 12V to 48V DC wide range power supported
- IP30 metal case

Redundant Ring, Fast Recovery to a Redundant Ethernet Network
The IGS-8044MT supports multiple redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Redundant Ring technology, Spanning Tree Protocol (802.1w RSTP), and redundant power supply system into customer’s industrial automation network to enhance system reliability and uptime in the harsh factory environments. The IGS-8044MT also protects customer’s industrial network connectivity with switching recovery capability that is used for implementing fault tolerant ring and mesh network architectures. If the Industrial network was interrupted accidentally, the fault recovery times could be less than 20ms to quickly bring the network back to normal operation.

Environmentally Hardened Design
With IP30 aluminum industrial case protection, the IGS-8044MT possesses a high level of immunity against electromagnetic interference, and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. The IGS-8044MT features wide operating temperature range from -40 to 75 Degree C and allows itself to be placed in almost any difficult environment.

Robust Layer 2 Features and Advanced Security
The IGS-8044MT supports robust advanced features including IEEE 802.1Q VLAN, GVRP, Port link aggregation, QoS, broadcast storm control, MAC address filtering, IGMP snooping enhanced security and bandwidth utilization to fit a variety of network applications. The IGS-8044MT allows the operation of high-speed trunk combining multiple ports. Maximum up to 4 ports of the IGS-8044MT can be assigned for 4 trunk groups and support fail-over as well. Additionally, its standard-compliant implementation ensures interoperability with equipments from other vendors.

Easy Installation and Dual-Redundant Power Supply
The IGS-8044MT is packaged in a compact case that allows either DIN rail or panel mounting for efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. In addition, the IGS-8044MT offers dual-redundant, reversible polarity 12~48V DC power supply inputs for high availability applications requiring dual or backup power inputs.

Physical Port
- 8-Port 10/100/1000Base-T RJ-45
- 4 Shared 100/1000Base-X SFP Slot
- 1 RJ-45 Console interface for basic switch management and setup
Industrial Conformance
- 12 to 48V DC, redundant power input interface with polarity reverse protection
- Stable operation during wide range of temperature from -40 to 75 Degree C
- IP30 metal case
- Relay alarm for port breakdown, power failure
- Supports Ethernet ESD protection
- FCC Class A, CE compatibility
- Free fall, Shock and Vibration Stability
- EMS EN6100-4-2 (ESD), EN6100-4-3(RS), EN6100-4-4 (EFT), EN6100-4-5 (Surge), EN6100-4-6(CS), EN6100-4-8, EN6100-4-11 certified
Rapid Ring
- Redundant Ring, Dual Homing, Coupling Ring Topology
- Provides redundant backup feature and the recovery time less than 20ms
Layer 2 Features
- Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab 10/100/1000Base-T and 100Base-FX, IEEE 802.3z 1000Base-SX / LX Ethernet standards
- Auto-Negotiation and Half-Duplex / Full-Duplex modes for all 10/100Base-TX and 1000Base-T ports
- Auto-MDI/MDI-X detection on each RJ-45 port
- Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
- Supports VLANs
> IEEE 802.1Q Tagged based VLAN
> Port-Based VLAN
> GVRP
> Up to 255 VLANs groups, out of 4K VLAN IDs
- Spanning Tree Protocol
> RSTP, IEEE 802.1w Rapids Spanning Tree Protocol
- Link Aggregation
> Up to 4 Trunk groups
> Up to 4 ports per trunk group with 1600Mbps bandwidth (Full Duplex mode)
> IEEE 802.3ad LACP (Link Aggregation Control Protocol)
> Static Port Trunk supported
Quality of Service
- 4 priority queues on all switch ports
- Traffic classification by
> Port-Based priority
> IEEE 802.1p Class of Service
> TOS / DSCP priority
- Strict priority and Weighted Round Robin (WRR) policies
- Ingress / Egress Bandwidth control on each port
Security
- IEEE 802.1x Port-Based Authentication
- MAC address Filtering
- IP address security management to prevent unauthorized intruder
- Port Monitoring to monitor the incoming or outgoing traffic on a particular port
Management
- WEB-Based, Telnet, Console Command Line management
- Access through SNMP v1 / v2c / v3 set and get requests
- SNMP Trap / SMTP email for alarm notification of events
- System Log Server / Client
- Configuration backup / restore
-TFTP firmware upgrade
- Supports LLDP (Link Layer Discovery protocol) to advise the Switch identification and capability on the LAN

Hardware Specification
Copper Ports
- 8 x 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
- 4 x 100/1000Base-X shared SFP interfaces
Switch Architecture
- Store-and-Forward
Switch Fabric
- 16Gbps / non-blocking
Switch Throughput
- 11.9Mpps@64bytes
Address Table
- 8K entries
Share Data Buffer
- 1Mbit
Maximum Frame Size
- 1522 Bytes packet
Flow Control
- Back pressure for Half-Duplex
- IEEE 802.3x Pause Frame for Full-Duplex
LED
- Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Orange)
- 4-Port 10/100/1000T: Link/Activity (Green), 10/100TX Full duplex/Collision (Orange)
- SFP port: LNK/ACT (Green)
- 1000T: LNK/ACT (Green), 1000M( Green)
Console Interface
- One RJ-45 to RS-232 male connector for switch management
Reset Button
- < 5 seconds: System reboot
- > 10 seconds: Factory Default
Dimension (W x D x H)
- 74.3 x 109.2 x 153 mm
Weight
- 1.15Kg
Power Input
- 12V to 48V DC input
Layer 2 function
Management Interface
- Console, Telnet, Web Browser, SNMP v1 / v2c / v3
Port Configuration
- Port disable / enable
- Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection
- Flow Control disable / enable
- Bandwidth control on each port
Port Status
- Display each port’s speed duplex mode, link status, Flow control status, Auto negotiation status
VLAN
- Port-Based VLAN, up to 8 VLAN groups
- IEEE 802.1q Tagged Based VLAN, 4K VLAN ID, up to 256 VLAN groups
Spanning Tree
- IEEE 802.1w Rapid Spanning Tree
Link Aggregation
- IEEE 802.3ad LACP / Static Trunk
- 4 groups of 4-Port trunk support
QoS
- Traffic classification based on :
> Port Number
> 802.1Q Tag
> 802.1p priority
> IP DSCP / TOS field in IP Packet
IGMP Snooping
- V2 and v3
- 1024 multicast groups and IGMP query
Bandwidth Control
- Per port bandwidth control
- Ingress: 500Kb~80Mbps
- Egress: 64Kb~80Mbps
Port Mirror
- RX / TX / Both
Security
- Supports 100 entries of MAC address for static MAC and another 100 for MAC filter
- Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder
SNMP MIBs
- RFC-1213 MIB-II
- RFC-2863 Interface MIB
- RFC-1493 Bridge MIB
- RFC-2674 Extended Bridge MIB (Q-Bridge)
- Private MIB
Standards Conformance
Regulation Compliance
- FCC Part 15 Class A, CE, EN60950
Safety
- EN60950-1
Standards Compliance
- IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX/100ase-FX
- IEEE 802.3z Gigabit SX/LX
- IEEE 802.3ab Gigabit 1000T
- IEEE 802.3x Flow Control and Back pressure
- IEEE 802.1d Spanning tree protocol
- IEEE 802.1w Rapid spanning tree protocol
- IEEE 802.1p Class of service
- IEEE 802.1Q VLAN Tagging
- IEEE 802.1x Port Authentication Network Control
Environment
Operating
- Temperature: -40 ~ 75 Degree C (DC power)
- Relative Humidity: 5 ~ 95% (non-condensing)
Storage
- Temperature: -40 ~ 85 Degree C
- Relative Humidity: 5 ~ 95% (non-condensing)

None at present, If you have any comments you feel would be useful to others when trying to install this product please contact us on support@saratota.co.uk or call 0845 500 1447