Industrial Wireless LAN
For robust Wireless access, the PLANET IAP-2000PS Industrial Access Point with PoE injector function is specially designed for the Wi-Fi applications over a TCP/IP network in the harden environment. The IAP-2000PS comes with 802.11n Wireless interface to provide up to 300Mbps performance and with the 4-Port IEEE 802.3af PoE injector interface to offer flexible power supply service. The IAP-2000PS is rated to operate at the temperature from -10 to 60 Degree C and is the ideal solution to wireless transmission in any harsh industrial environment.

IPv6 / IPv4 Web and SNMP Management
The IAP-2000PS supports both IPv6 and IPv4 web management functions. Its SNMP feature allows the system administrator to remote monitor and control the network devices more efficiently. With the easy and friendly management interface and plenty of management functions included, the IAP-2000PS is the best choice for system Integrators to build the large wireless service and for SMB to connect with the IPv6 network.

Multiple Wireless Network Technologies for Greater Access
The IAP-2000PS features 802.11n radio with 2T2R antenna technology compliant with 802.11b/g standards. Compared with general wireless access points, the IAP-2000PS offers more powerful and flexible capability for LAN clients to access the network with management functions.

Wide Range of Wireless Security Support
To secure the wireless communication, the IAP-2000PS supports up-to-date encryption, WPA-PSK /WPA2-PSK with TKIP / AES encryption. In order to simplify the security settings, the IAP-2000PS supports Wi-Fi Protected Setup (WPS) configuration with PBC/PIN type. By just clicking the WPS option, the secure connection between the AP and wireless client will be established immediately.

IEEE 802.3af Power over Ethernet Industrial Switch
PoE feature is supported in the industrial Ethernet devices more and more often for efficient operation in harsh environments. The IAP-2000PS in-line power follows IEEE 802.3af standard and able to give power to 4 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5 / 5e UTP wire. With data and power over Ethernet from one unit, the IAP-2000PS shall reduce cables deployment and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power will lower the installation costs and simplifies the installation effort. Furthermore, there is only 24V DC input in some industrial environments, the IAP-2000PS supports both 24V DC and 48V DC voltages input and able to provide more wide range of industrial IEEE 802.3af PoE applications.

Easy Installation and Wide Range of Power Usage
The IAP-2000PS is packaged in a strong IP30 case that allows either DIN rail or panel mounting for efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operations. It also offers dual-redundant, reversible polarity 24V or 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.

- 4 x 10/100Base-TX Ports with PoE (PSE, Power Sorucing Equipment)

- Complies with IEEE 802.11n Wireless LAN Speed up to 300Mbps

- IPv4 / IPv6 Web Management

- 2 x 5dBi Detachable Omni-directional Antenna

- Supports 64/128-bit WEP, WPA / WPA2, and WPA-PSK / WPA2-PSK, 802.1x

- Supports WISP Mode, IEEE 802.1Q VLAN

- -10 to 60 Degree C Operating Temperature

- Redundant Power Design

- IP30 Aluminum case protection

- DIN Rail and Wall-mount Design

Hardware Specification
10/100Base-TX Ports
- 4 x 10/100Base-TX Auto-Negotiation
- Auto MDI / MDI-X
IEEE 802.3af PoE Ports
- 4 x PSE (Port 1-4 )
Antenna
- 2 x Detachable RP-SMA Connector
- 2 x 5dBi SMA Omni-directional antenna included in the package
Enclosure
- IP30 Metal Case
LED Indicators
- P1, P2, PWR, FAL, WPS, WLAN, SEC, LAN1~4, PoE
Button
- WPS Button
- Reset Button
Dimensions (W x D x H)
- 135 x 87.8 x 56 mm
Weight
- 871g
Power Requirement
- DC 24V / 48V
Installation
- DIN Rail Kit and Wall Mount Ear
Wireless Interface Specification
Standard
- Compliance with IEEE 802.11b/g/n
Frequency Band
- 2.4 to 2.4835GHz (Industrial Scientific Medical Band)
Modulation Type
- DSS with DBPSK, DQPSK, QPSK and CCK
- OFDM with BPSK, QPSK, 16-QAM and 64-QAM
Wireless Data Rate
- IEEE 802.11b: 1/2/5.5/11Mbps
- IEEE 802.11g: 6/9/12/18/24/36/48/54Mbps
- IEEE 802.11n: 14/29/43/58/87/116/130/144Mps in 20MHz
30/60/90/120/180/240/270/300Mbps in 40MHz
Opt. Channel
- America / FCC: 2.414~2.462GHz (11 Channels)
- Europe / ETSI: 2.412~2.472GHz (13 Channels)
- Japan / TELEC: 2.412~2.484GHz (14 Channels)
RF Output Power
- IEEE 802.11b: 18 dBm
- IEEE 802.11g: 15 dBm
- IEEE 802.11n: 15 dBm
Receiver Sensitivity
- IEEE 802.11b CCK 1.0Mbps: -94dbm
11b CCK 11.0Mbps: -91dbm
- IEEE 802.11g OFDM 6Mbps: -92dbm
11g OFDM 54Mbps: -76dbm
- IEEE 802.11n 20MHz MCS7: -72dbm
11n 40MHz MCS7: -70dbm
Wireless Management Features
Wireless Mode
- Access Point
Channel Width
- 20MHz / 40MHz
Data Encryption Security
- 64 bit / 128 bit WEP
- WPA / WPA2
- WPA-PSK / WPA2 / WPA2-PSK
- IEEE 802.1x Network Access Control
Management
- Web-Based Configuration
Wireless Isolation
- Yes
Power over Ethernet
PoE Standard
- IEEE 802.3af Power over Ethernet / PSE
PoE Power Supply Type
- End-Span
PoE Power Output
- Per Port 48V DC, 350mA. Max. 15.4 Watts
Power Pin Assignment
- 1/2(+), 3/6(-)
Protocol
Protocol / Feature
- Bridge and WISP mode
- WDS and WPS
- Static Routing and RIPv1/2
- DMZ and Virtual Server
- IEEE 802.1D
- IEEE 802.1Q VLAN
- QoS
- SNTP
- WMM
- DHCP Server / Client
- IGMP Proxy and DNS Proxy
- UPnP and DDNS
- SNMP
Management
- Web-Based configuration
Standards Conformance
Standards Compliance
- IEEE 802.11b/g and 802.11n Wireless LAN
- IEEE 802.3 Ethernet
- IEEE 802.3u Fast Ethernet
- IEEE 802.3x Full-Duplex Flow Control
- IEEE 802.3af Power over Ethernet
- IEEE 802.1Q VLAN
Environment Specification
Temperature / Humidity
- Operating: -10~60 Degree C, 5~ 90% (non-condensing)
- Storage: -20~70 Degree C, 0~95% (non-condensing)
Emission
- FCC, CE
Stability Testing
- IEC60068-2-32 (Free Fall)
- IEC60068-2-27 (Shock)
- IEC60068-2-6 (Vibration)

None at present, If you have any comments you feel would be useful to others when trying to install this product please contact us on support@saratota.co.uk or call 0845 500 1447