Reliable High-Speed Industrial Wireless Access Point for Harden Environment
Industrial Wireless LAN
For robust Wireless access, the PLANET IAP-2000PE Industrial Access Point brings users a new choice. The IAP-2000PE is specially designed for the Wi-Fi application over a TCP/IP network in the harden environment. The IAP-2000PE comes with 802.11n Wireless interface for up to 300Mbps wireless performance and provides 4 x 10/100Mbps copper ports with 1-Port IEEE 802.3af PoE PD(Powered Device) inject interface delivered in an IP30 rugged strong case. The IAP-2000PE is rated to operate at the temperature from -10 to 60 Degree C. The IAP-2000PE is the ideal solution to wireless transmission in any harsh industrial environment.

IPv6 / IPv4 Web and SNMP Management
The IAP-2000PE supports both IPv6 and IPv4 web management functions. Its SNMP feature allows the system administrator to remote monitor and control the network devices more efficiently. With the easy and friendly management interface and plenty of management functions included, the IAP-2000PE is the best choice for system Integrators to build the large wireless service and for SMB to connect with the IPv6 network.

Steady and Wide Range Wireless Network Communication
The IAP-2000PE features 802.11n radio with 2T2R antenna technology compliant with 802.11b/g/n standards. It is equipped with two external 5dBi High-Gain antennas providing strong signal and excellent performance even in the long range or bad environment. With detachable RP-SMA connector design in the IAP-2000PE, it allows users to manually exchange higher gain antenna for further wireless coverage range.

Multiple Operating Modes
The IAP-2000PE supports multiple wireless communication connectivity: Wireless AP, Wireless Repeater, WDS Point-to-Point (PtP) and Point-to-Multipoint (PtMP), allowing various applications that give users more comprehensive experience. It also helps users to easily build wireless network and extend the wireless range of existed wireless network.

Wide Range of Wireless Security Support
To secure the wireless communication, the IAP-2000PE supports up-to-date encryption, WPA-PSK / WPA2-PSK with TKIP/AES encryption. In order to simplify the security settings, the IAP-2000PE supports Wi-Fi Protected Setup (WPS) configuration with PBC/PIN type, by just clicking the options and the secure connection between AP and wireless client will be built immediately.

Easy Installation and Wide Range of Power Usage
The IAP-2000PE is packaged in a strong IP 30 case that allows either DIN rail or panel mounting for efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operations. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.

Flexible Deployment with PoE Feature
Compliant with IEEE 802.3af Power over Ethernet standard, the IAP-2000PE can be powered and networked by a single UTP cable. It thus reduces the needs of extra cables and dedicated electrical outlets on the wall, ceiling or any other places where are difficult to reach. The wireless AP deployment becomes more flexible and worries free from the power outlet locations.

- 4 x 10/100Base-TX Ports with 1-port PoE (PD, Powered Device)

- Complies with IEEE 802.11n Wireless LAN speed up to 300Mbps

- IPv4 / IPv6 Web Management

- 2 x 5dBi Detachable Omni-directional Antenna

- Supports 64/128-bit WEP, WPA / WPA2, and WPA-PSK / WPA2-PSK, 802.1x

- Supports IEEE 802.1Q VLAN

- -10 to 60 Degree C Operating Temperature

- Redundant Power Design

- IP 30 Aluminum case protection / DIN Rail and Wall-mount Design

Hardware Specification
10/100Base-TX Ports
- 4 x 10/100Base-TX Auto-Negotiation
- Auto MDI / MDI-X
IEEE 802.3af PoE Ports
- 1 x PD (Port-1)
Antenna
- 2 x Detachable RP-SMA Connector
- 2 x 5dBi SMA Omni-directional antenna included in the package
Enclosure
- IP 30 Metal Case
LED Indicators
- P1, P2, PWR, FAL, WPS, WLAN, SEC, LAN1~4, PoE
Button
- WPS Button
- Reset Button
Dimension (W x D x H)
- 87.8 x 135 x 56 mm
Weight
- 871g
Power Requirement
- DC 12-48V / AC 24V
Installation
- DIN Rail Kit and Wall Mount Ear
Wireless Interface Specification
Standard
- Compliance with IEEE 802.11b/g/n
Frequency Band
- .4 to 2.4835GHz (Industrial Scientific Medical Band)
Modulation Type
- DSS with DBPSK, DQPSK, QPSK and CCK
- OFDM with BPSK, QPSK, 16-QAM and 64-QAM
Wireless Data Rate
- IEEE 802.11b: 1/ 2/ 5.5/ 11Mbps
- IEEE 802.11g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54Mbps
- IEEE 802.11n: 14/ 29/ 43/ 58/ 87/ 116/ 130/ 144Mps in 20MHz
30/ 60/ 90/ 120/ 180/ 240/ 270/ 300Mbps in 40MHz
Opt. Channel
- America / FCC: 2.414~2.462GHz (11 Channels)
- Europe / ETSI: 2.412~2.472GHz (13 Channels)
- Japan / TELEC: 2.412~2.484GHz (14 Channels)
RF Output Power
- 802.11b: 18 dBm
- 802.11g: 15 dBm
- 802.11n: 15 dBm
Receiver Sensitivity
- 802.11b CCK 1.0Mbps: -94dbm
- 802.11b CCK 11.0Mbps: -91dbm
- 802.11g OFDM 6Mbps: -92dbm
- 802.11g OFDM 54Mbps: -76dbm
- 802.11n 20MHz MCS7: -72dbm
- 802.11n 40MHz MCS7: -70dbm
Wireless Management Features
Wireless Mode
- Access Point
Channel Width
- 20MHz / 40MHz
Data Encryption Security
- 64 bit / 128 bit WEP
- WPA / WPA2
- WPA-PSK / WPA2-PSK
- 802.1x Network Access Control
Management
- Web-Based Configuration
Wireless Isolation
- Yes
Protocol
Protocol / Feature
- Bridge mode
- IPv6
- WDS and WPS
- Static Routing and RIPv1/2
- DMZ and Virtual Server
- 802.1D
- 802.1Q VLAN
- QoS
- SNTP
- WMM
- DHCP Server / Client
- IGMP Proxy and DNS Proxy
- UPnP and DDNS
- SNMP
Management
- Web-Based configuration
Standards Conformance
Standards Compliance
- IEEE 802.11b/g and 802.11n Wireless LAN
- IEEE 802.3 Ethernet
- IEEE 802.3u Fast Ethernet
- IEEE 802.3x Full-Duplex Flow Control
- IEEE 802.3af Power over Ethernet
- IEEE 802.1Q VLAN
Environment Specification
Temperature / Humidity
- Operating: -10~60 Degree C, 5~ 90% (non-condensing),
- Storage: -20~70 Degree C, 0~95% (non-condensing)
Emission
- FCC, CE
Stability Testing
- IEC60068-2-32 (Free Fall)
- IEC60068-2-27 (Shock)
- IEC60068-2-6 (Vibration)

None at present, If you have any comments you feel would be useful to others when trying to install this product please contact us on support@saratota.co.uk or call 0845 500 1447