Cost-effective Desktop Size / Fiber Capability / Group Managed Switch
The PLANET WGSD-1022C is a desktop size Layer 2 Managed Fast Ethernet Switch. It provides 8 10/100Mbps Fast Ethernet ports and 2 Gigabit TP/SFP interfaces. The compact-size design Switch not only fits into space-limited environment but also is mountable in a 19-inch rack with attached rack-mounting kits. The equipped Gigabit SFP slot makes the WGSD-1022C with capability of fiber link for distance extending and can handle extremely large amounts of data in a secured topology which is linked to a backbone or high capacity servers.
The various supports of QoS mode and VLAN features make the WGSD -1022C meet the needs of SOHOs, SMBs and enterprises in effective data traffic control such as VoIP, video streaming and multicast applications. The key features are shown as below:
• IP Stacking up to 8 units
• 802.1Q VLAN • Rapid Spanning Tree
• SNMP / SNMP Trap • IGMP Snooping
• SFP slots, Fiber link capability
Enhanced Layer 2 Features
The WGSD-1022C can be programmed for enhanced switch management functions, such as per port speed configuration, Port Trunk in g, VLAN, Rapid Spanning Tree, QoS, bandwidth control and IGMP Snooping. The WGSD-1022C provides Port-based VLAN, 802.1Q Tagged VLAN and the VLAN groups allowed on the WGSD-1022C will be maximally up to 255. Via support in g port trunk in g, the WGSD-1022C offers the operation of a high-speed trunk comb in in g multiple ports. It also provides four groups of up to 8 ports for trunking and support s fail-over.
Efficient Management – Stacking Management
For efficient management, the WGSD-1022C is equipped with console interface, Web interface and SNMP agent. With its built-in Web-based management, the WGSD-1022C offers an easy-to-use, platform-independent management and configuration facility. It support s standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the WGSD -1022C can also be accessed via Telnet and the console port.
One of the management features of WGSD-1022C is the IP Stacking function support. It helps network managers to easily configure up to 8 switches in the same series via one single one IP address instead of connecting and setting each unit one by one.
• Physical Port
–8-Port 10/100Base-TX RJ-45
–2-Port Gigabit TP/SFP combo interface
• Layer 2 Features
–Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit
Ethernet standard
–Auto-negotiation and half duplex/full duplex modes for all 10Base-T/100Base-TX
and 1000Base-T ports
–High performance of Store–and-Forward architecture, broadcast storm control and
runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth
–IEEE 802.1Q Tagged based VLAN and Port-based VLAN
–Up to 4 Trunk groups, each trunk can be up to maximum 8 port with 1.6Gbps
bandwidth(Full Duplex Mode)
–IEEE 802.1d, IEEE 802.1w, classic Spanning Tree Algorithm or Rapid Spanning Tree
support
• Quality of Service
–4 priority queues on all switch ports
–Strict priority and Weighted Round Robin (WRR) CoS policies
–QoS and bandwidth control on each port
• Multicast
–IGMP Snooping v1 and v2
–IGMP Port and Group policy
• Security
–IEEE 802.1x Port-based Authentication, RADIUS server authentication or Local
account authentication
–MAC address Filtering and MAC address Binding
–Port Mirroring to monitor the incoming or outgoing traffic on a particular port
• Management
–WEB-based, Telnet, Console Command Line management
–Access through SNMP v1 and v2c set and get requests
–Four groups (history, statistics, alarms, and events) of embedded remote
monitoring (RMON) agents for network monitoring and traffic analysis
–EMI standards comply with FCC, CE class A
None at present, If you have any comments you feel would be useful to others when trying to install this product please contact us on support@saratota.co.uk or call 0845 500 1447
