Using the PLANET PoE Injector adapters, you can power most DC network devices such as hubs, Wireless access points, IP cameras and etc., over the same Cat 5/5e cable used to connect the device to the network.

The PoE product includes two units: an Injector and a Splitter. An Injector inserts current into the unused wires in a standard network cable (pins: 4, 5, 7 and 8) allowing the cable between the Injector and the Splitter to transfer power and network signals simultaneously. The maximum distance between the Injector and Splitter can reach 100m/328ft, as defined by the IEEE 802.3 standard.

- Provides low-voltage DC power over existing Category 5 cablingto a device with an Ethernet port
- Distance up to 100 meters
- Protects devices from possible damages due to power-surges
- Three different output voltage options (5V/2A, 9V/1.2A, 12V/1A)to fitvarious
devices
- Work with EIA568, category 5, 4-pair cables for 10Base-T or 100Base-TX

- Model POE-100 / POE-100S

Category 5 pin power usage -: Pin 4, 5 +:Pin 7, 8

Output voltage, current POE-100S-5V : DC 5V , 2A
POE-100S-9V : DC 9V , 1.2A
POE-100S-12V: DC 12V, 1A

Ethernet connector RJ-45

Ethernet data rate 10/100Mbps

Number of devices that can be powered is 1
Ethernet data cable TIA/EIA-568, Category 5/5e cable

Dimensions (W x D x H) 64.5 x 42.3 x 20.4 mm
Emission FCC class B, CE-mark

None at present, If you have any comments you feel would be useful to others when trying to install this product please contact us on support@saratota.co.uk or call 0845 500 1447