Home   About Us   Delivery   Our Terms   FAQ'S   Contact Us   Site Map      
Items: Value: View Cart | Checkout 
 

MAP-3120 802.11a/b/g Indoor MESH Access Point – Layer 2
MAP-3120 802.11a/b/g Indoor MESH Access Point – Layer 2
Ref: MAP-3120



Qty  
<< PREVIOUS PAGE  CHECKOUT NOW >>    

Email to a friend 

Comments

Product information in process of being added
Please call Saratota Ltd on 0845 500 1447
or Email Sales@saratota.co.uk
For more information

CLICK TO SEE DATA SHEET


For truly Wireless network connectivity, PLANET Mesh Access Point, MAP-3120, is designed with IEEE 802.11a/b/g standards and addressed on providing a high performance mesh network. It provides local wireless connectivity at any location over a self-adaptation mesh backhaul. All mesh nodes can operate at 2.4GHz for long range and better penetration, or at 5GHz to minimize the frequency interference. The detachable antennas design allows users to use proper antennas for various deploying requirements.

Though there are multiple interfaces (LAN, WLAN, Backhaul) integrated in MAP-3120, they are all bridged with one single IP. This is layer 2 operation. The layer 2 infrastructure is suitable for smaller scale mesh network. Comparing with layer 3 operation, the configurations and installations of a layer 2 infrastructure will be simpler and easier. Without the extra resource consuming on routing, the overall performance of layer 2 operation is better than layer 3 operation.

To facilitate the administration task throughout the mesh network, PLANET provides a centralized managing software: MAP Management System. This software is built based on SNMP protocol and can be installed in a computer. After launching, this software can locate and monitor all MAP-3120 in the same network. The graphical interface allows administrator to understand the whole network status in seconds.

• Dual wireless interfaces for independent Backhaul link and local clients connection
2 x IEEE 802.11a/b/g adapters
2 x reverse SMA connector
• Completes AODV (Ad-Hoc On Demand Vector) routing (layer 2) between all node APs
• Adjustable output power
• Central management software
AES backhaul communication
• IEEE 802.1q VLAN, multiple VLAN / SSID supports
• IEEE 802.1x, IEEE 802.1i WPA / WPA2, and VPN pass-through mechanisms
• Supports Wireless Separation, Watchdog mechanism
• Supports SNMP v2c, v3
• IEEE 802.3af Power over Ethernet capable


None at present, If you have any comments you feel would be useful to others when trying to install this product please contact us on support@saratota.co.uk or call 0845 500 1447