The PLANET IFT-802 industrial 10/100BaseTX to 100BaseFX Media Converter is a cost-effective solution for the converting 10/100Base-TX (Auto MDI/MDIX) to 100Base-FX cabling. It provides two power inputs that can be connected simultaneously to the DC power sources. That is, if one power input fails, the other one acts as a backup.
The PLANET IFT-802 also provides relay alarm outputs to warn when the port link failure, so the technician can respond quickly with appropriate emergency operation procedures.
Also, there are DIP-switches to set the operation mode for relay alarm, Fiber ports, link loss forwarding function, and UTP operation mode.
UTP to Fiber Media converter
Auto Negotiation Speed and Half / Full Duplex
Supports12 to 48V DC power inputs
TX port support Auto MDI / MDI-X
Relay alarm output for port link failure
IEEE 802.3x flow control support
Flow control on full-duplex
Back pressure on half-duplex
Built-in Link Lose Forwarding Technology
DIN-Rail or wall mountable
DIP-switches to set the operation mode and Link- Lost-Forwarding function
12 to 48V DC, redundant power with polarity reverse protect function and
connective removable terminal block for master and slave power
0 to 60 Degree C operation temperature
IP-30 Aluminum case
EMI complies with FCC Class A, CE EN6100-4-2, CE EN6100-4-3, CE EN6100-4-4,
CE EN6100-4-5 and CE EN6100-4-6
Stability testing with IEC60068-2-32(Free fall), IEC60068-2-27(Shock) and
IEC60068-2-6(Vibration)
Power (Green), Power1 (Green), Power2 (Green), Fault (Orange)
Fiber: Link / Activity (Green)
Half / Full Duplex (Orange)
TX: 10/100(Green)
Link (Green)
Half / Full Duplex (Orange)
DIP Switch 1: ON: Enables Port Alarm OFF: Disables Port Alarm
DIP Switch 2: ON: Enables LLF (Link Lose Forwarding) OFF: Disables LLF (Link Lose Forwarding)
DIP Switch 3: ON: 100Base-FX Half-mode OFF: 100Base-FX Full-mode
DIP Switch 4: ON: 100Base-TX Full-duplex mode OFF: Auto-Negotiation