High Power PoE for Security and Public Service Applications
To fulfill the High Power PoE demand of Gigabit network applications, the new member in PLANET PoE Switch family – the GSD-808HP is an ideal solution. The GSD-808HP is equipped with eight 10/100/1000Mbps PoE ports and internal power supply in a simple 13-inch, desktop size metal case. Each of the Gigabit ports feature High Power IEEE 802.3at Power over Ethernet (PoE) that enables up to 30 Watts power output and data transmission both delivered over one Cat.5E / 6 Ethernet cable, providing double PoE power than conventional 802.3af PoE currently.

Plug & Play PoE Function
The 8 Gigabit High Power PoE ports in the GSD-808HP support both 802.3af and 802.3at PoE standards to allow users flexibly deploy standard and high powered devices simultaneously with no need of software configuration. By offering 130 Watts PoE budget, maximum eight 15.4 Watts IEEE 802.3af devices or four 30 Watts IEEE 802.3at devices can be easily installed regardless of the power-socket limitation. Simply plug in the Ethernet cables and power cord, the GSD-808HP is ready to provide Gigabit high speed network communication and high power PoE injector functions.

Automatic PoE Management
To facilitate power management, the GSD-808HP implements powerful PoE intelligent features:
- Over Temperature Protection3
- PoE Power Usage Display

The automatic Over Temperature Protection helps to prevent power budget overloading while temperature rises. The four orange LEDs on the right hand side of the GSD-808HP front panel indicates “PoE Power Usage” by four level - 25%, 50%, 75% and 95% positioned from the bottom to the top. With these LED indications, you can monitor the PoE power status of the GSD-808HP easily and efficiently.

Easy Installation & Cable Connection
Providing data transfer and High Power PoE in one unit, the GSD-808HP shall reduce the need of extension cables and dedicated electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort.

All RJ-45 copper interfaces in the GSD-808HP support 10/100/1000Mbps Auto-Negotiation for optimal speed detection through RJ-45 Category 6, 5 or 5e cables. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.

RJ-45 Interface
- 8-Port 10/100/1000Mbps Gigabit Ethernet ports
- 8-Port supports 56V DC power to PoE Powered Device

Power over Ethernet (PoE)
- Complies with IEEE 802.3af / 802.3at Power over Ethernet End-Span PSE
- Up to 8 IEEE 802.3af / 802.3at devices powered
- Supports PoE Power up to 30 Watts for each 802.3at PoE port
- Over Temperature Protection
- Auto detect powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m

Switching
- Hardware based 10/100/1000Mbps Auto-Negotiation and Auto MDI/MDI-X
- Flow control for Full Duplex operation and back pressure for Half Duplex operation
- Integrates address look-up engine, supporting 8K absolute MAC addresses
- 9K Jumbo Frame supports at all speeds (10/100/1000Mbps)
- Automatic address learning and address aging

Hardware
- 13-inch desktop size, rack mountable; 1U height
- LED indicators for system Power, Fan Failure, per port speed, Link / Act
- LED indicators for per port PoE In-Use and PoE Power Usage (25%, 50%, 75% and 95%)
- 1 silent FAN to provide stable and efficient power performance
- Energy-Saving technology
* Link down power saving
** Intelligent scales power based on cable length

Hardware Specification
Network Connector: 8-Port RJ-45 for 10/100/1000Base-T
PoE Injector Port: 8-Port with 802.3af / 802.3at Power over Ethernet (PoE) injector function
LED Display: System: Power x1 (Green), FAN Alert x1 (Orange), PoE Power
Usage x4 (Orange)
Per Port: PoE In-use (Orange), Speed (Green), LNK/ACT (Green)
Switch Architecture: Store and Forward switch architecture
MAC Address Table: 8K MAC address table with Auto learning function
Switch Fabric: 16Gbps
Switch Throughput: 11.9Mbps
Jumbo Packet Size: 9K Bytes
Flow Control: Back pressure for Half-Duplex. IEEE 802.3x Pause Frame for Full-Duplex
Power Requirement: AC 100~240V, 50/60Hz, 1.5A
Power Consumption: 150 Watts / 511BTU
Dimension (W x D x H): 330 x 155 x 43.5 mm
Weight: 1.56kg

Power over Ethernet
PoE Standard: IEEE 802.3af / 802.3at Power over Ethernet / PSE
PoE Power Supply Type: End-Span
PoE Power Output: Per Port 56V DC, 275mA. Max. 15.4 Watts (IEEE 802.3af)
Per Port 56V DC, 535mA. Max. 30 Watts (IEEE 802.3at)
Power Pin Assignment: 1/2(+), 3/6(-)
PoE Power Budget: 130 Watts
Max. number of Class 2 PD: 8
Max. number of Class 3 PD: 8
Max. number of Class 4 PD: 4

Standard Conformance
EMI Safety: FCC Class A, CE
Operating environment: 0 ~ 50 Degree C
Storage environment: -40 ~ 70 Degree C
Operating Humidity: 5 ~ 95%, Relative Humidity, non-condensing
Storage Humidity: 5 ~ 95%, Relative Humidity, non-condensing
Standard Compliance: IEEE 802.3: Ethernet
IEEE 802.3u: Fast Ethernet
IEEE 802.3ab: Gigabit Ethernet
IEEE 802.3x: Flow Control
IEEE 802.3af: Power over Ethernet
IEEE 802.3at: High Power over Ethernet

None at present, If you have any comments you feel would be useful to others when trying to install this product please contact us on support@saratota.co.uk or call 0845 500 1447