Cost effective 24 Ports Power over Ethernet with Enhanced Features for SMB PoE Networking
The PLANET FGSW-2620PVM PoE Switch features 802.3af Power over Ethernet (PoE) function, which optimizes the installation and safe power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones and IP Surveillance cameras. 802.3af PoE capabilities reduce installation costs of add-in network productivity devices. It frees the wireless AP deployment from restrictions of power outlet locations. With PoE features, power and data switching are integrated into one unit and delivered over a single cable, eliminating costs for additional AC wiring and reducing installation time. It provides a compact, affordable, safe and reliable power solution for small to medium enterprises.
Power over Ethernet, Easy Cabling installation
The PoE in-line power following the standard IEEE 802.3af makes the FGSW-2620PVM able to power on 24 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire. With data and power over Ethernet from one unit, the FGSW-2620PVM shall reduce cables deployment and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. It is also proud of the key feature energy saving. With more efficient switching power supply, the efficiency of the FGSW-2620PVM would be much better than four linear power adapters in a long run.
Centralized Power Distribution with Remote Management
The remote PoE management functions of FGSW-2620PVM make it easy to survey and control the PoE power provision to the devices and ensure interoperability with equipment from other vendors. Via Web interface, SNMP trap and SNMP monitoring, the manager can get the PoE devices status and alert immediately. The over-temperature detection of the PoE Switch offers a safe and stable PoE operating by limit the output power according to detected temperature to prevent destructive breakdown caused by un-expected overheating.
High Performance Wire-Speed Switching
The PLANET FGSW-2620PVM offers 24 10/100Mbps Fast Ethernet ports and 2 Gigabit TP/SFP combo ports. The two Gigabit TP/SFP combo ports can be either 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through SFP (Small Factor Pluggable) interface. PLANET FGSW-2620PVM boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 8.8Gbps. Its two built-in GbE uplink ports also offer incredible extensibility, flexibility and connectivity to the Core switch or Servers.
Efficient Management
Afford the current network to grow and expand, the PLANET FGSW-2620PVM provides console and telnet command line interface, advanced WEB and SNMP management interface to fill this kind of demand. With its built-in Web-based management, the FGSW-2620PVM offers an easy-to-use, platform-independent management and configuration facility. The FGSW-2620PVM supports standard Simple Network Management Protocol (SNMP) and can be monitored via any standard-based management software. For text-based management, the FGSW-2620PVM can also be accessed via Telnet and the console port. Moreover, the FGSW-2620PVM offers secure remote management by supporting Secure Socket Layer (SSL) connection which encrypts the packet content at each session.
Robust Layer 2 Features
For efficient management, via WEB interface, the FGSW-2620PVM can be programmed for basic switch management functions such as port speed configuration, Port link aggregation, IEEE 802.1Q VLAN and Q-in-Q VLAN, Port Mirroring, Rapid Spanning Tree and ACL security. Additionally, the firmware includes advanced features such as IGMP snooping, QoS (Quality of Service), broadcast storm and bandwidth control, to enhance bandwidth utilization.
Advanced Security and Quality of Service
The PLANET FGSW-2620PVM offers comprehensive Layer 2, Layer 3 and Layer 4 Access Control List (ACL) to filter out unwanted traffic. Its protection mechanisms comprises of RADIUS and Port-based 802.1X user and device authentication. Moreover, the switch provides MAC filter, Static MAC, IP/MAC binding and Port Security for enforcing security policies to the edge. The administrators can now construct highly secured corporate networks with considerably less time and effort than before.
To ensure IP voice and video communication get the quality of service needed, the FGSW-2620PVM classifies traffic and prioritizes Layer 2 802.1p or Layer 3 IP DSCP traffic into four hardware queues that support strict or Weighted Round Robin (WRR) queuing algorithms. It also empowers the SMB IP office to take full advantages of the limited network resources and guarantees the best performance in VoIP and Video conferencing transmission.
Physical Port
24-Port 10/100Mbps Fast Ethernet ports with PoE Injector
2 10/100/1000Mbps TP and SFP shared combo interfaces
RS-232 male DB9 console interface for Switch basic management and setup
Reset button for system management
Power over Ethernet
Complies with IEEE 802.3af Power over Ethernet End-Span PSE
Up to 24 IEEE 802.3af devices powered
PoE Power up to 15.4 Watts for each PoE port
Auto detect powered device (PD)
Circuit protection prevent power interference between ports
Remote power feeding up to 100m
PoE Management
Total PoE power budget control
Per port PoE function enable/disable
PoE Port Power feeding priority
Per PoE port power limit
PD classification detection
Layer 2 Features
Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit
Ethernet standard
Supports Auto-negotiation and Full-Duplex / Half-Duplex modes for all 10Base-
T/100Base-TX and 1000Base-T ports
Auto-MDI/MDI-X detection for each RJ-45 port
Prevents packet loss Flow Control:
IEEE 802.3x Pause Frame flow control for Full-Duplex mode
Back-Pressure Flow Control in Half-Duplex mode
High performance of Store-and-Forward architecture, runt/CRC filtering eliminate
erroneous packets to optimize the network bandwidth
Broadcast / Multicast / Unicast storm control
8K MAC address table, automatic source address learning and ageing
VLANs
IEEE 802.1Q Tag-based VLAN
Port-Based VLAN
Q-in-Q tunneling
Up to 255 VLANs groups, out of 4041 VLAN IDs
Link Aggregation
up to 13 trunk groups
up to 8 ports per trunk group with 1.6Gbps bandwidth (Full Duplex Mode)
IEEE 802.3ad LACP (Link Aggregation Control Protocol)
Cisco ether-channel (Static Trunk)
Spanning Tree Protocol
STP, IEEE 802.1D (Classic Spanning Tree Protocol)
RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
Port Mirroring to monitor the incoming or outgoing traffic on a particular port
Quality of Service
4 priority queues on all switch ports
Traffic classification:
IEEE 802.1p CoS
IP TOS / DSCP to 802.1p priority mapping
Port-Based priority
Strict priority and Weighted Round Robin (WRR) CoS policies
QoS and In / Out bandwidth control on each port
Multicast
IGMP Snooping v1 and v2
IGMP Snooping v2 fast leave
Querier mode support
Security
IEEE 802.1x Port-Based network access control protocol
RADIUS users access authentication
L2 / L3 / L4 Access Control List (ACL)
MAC Filtering and Source IP-MAC / Port-Binding
Port Security for Source MAC address entries filtering
Management
Switch Management Interface
Console / Telnet Command Line Interface
Web switch management
SNMP v1, v2c switch management
SSL switch management
DHCP client for IP address assignment
Built-in Trivial File Transfer Protocol (TFTP) client
Firmware upgrade via TFTP or HTTP
Configuration upload / download via TFTP or HTTP
Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events)
SNMP trap for interface Link Up and Link Down notification
Ping function
None at present, If you have any comments you feel would be useful to others when trying to install this product please contact us on support@saratota.co.uk or call 0845 500 1447